FDM

-210°f heat deflection for ABS, 260°f for Polycarbonate
-Models are produced at approximately ± .005"
-Orientation affects strength, resolution and build time.
(see sidebar)
-Lead-time is based on part size and geometry
-ABS FDM models can be built as large as 19.7 x 23.6 x 23.6 in.
-Polycarb models can be built as large as 16 x 14 x 16 in.
-Sectioning & assembling larger parts is not uncommon

Data: ABS Plastics
Data: Polycarbonate

Send your file(s) via email to: upload@rapid3d.com

POLYJET *New for 2006*

-Stronger than 11120 and more accurate than SLA
-Extremely small .0005" layer slice height for better contours
-Paintable, can be plated & ideal for rubber tooling masters
-Perfect for assemblies and medium to small parts
-Variety of Materials including Elastomers

Data: Full Cure 700 (Amber)
Data: Full Cure 800 (Vero Black, Blue & White)
Data: Full Cure 900 (Elastomer Tango Black & Gray)

Send your file(s) via email to: upload@rapid3d.com
MJM
-Wall thickness as low as .012"
-Extremely high resolution .0017" layer height
-Great for assemblies and extremely small detailed parts
-Least expensive multiples

Data: VisiJet M100

Send your file(s) via email to: upload@rapid3d.com
SLA
-Models are produced at approximately ± .005"
-Presentation Models "primed for perfection".
-Lens like capabilities with polished waterclear resin
-Perfect Soft Tool Patterns for Urethane Casting

Data: WaterClear SOMOS 11120
Data: Elastomer SOMOS 9120
Data: Proto-Tool

Send your file(s) via email to: upload@rapid3d.com

CASTINGS

-Urethanes can mimic other materials
-Multiple: Durometers, Colors (matched PMS) and Textures
-Limited run samples or production "like" quantities up to 100 pieces

Send your file(s) via email to: upload@rapid3d.com


"Positioning Parts for Strength"
-Important for FDM-

The wall thickness and/or orientation can vary the strength of your part or certain features dramatically.

The orientation of your file can affect your parts features and they may become susceptible to breaking at layer points, but, for maximum feature strength the best orientation can sometimes increase the lead time and price of your prototype.

*NOTE* The best overall orientation, as well as the best pricing usually coincide. It can be helpful to discuss your specific needs, as well as, your intended use of the prototype with C.ideas during the quotation process. FIT, FORM and/or FUNCTION (or all of the Above).
| 847.639.1000 Telephone
720 Industrial Drive # 132 | Cary, Illinois 60013

© 1998-2006 C.ideas, Inc.
All trademarks are the sole
property of their respective owners.